tu-2 TUNS50 ac-dc power supplies power module type tun s 50 f 05 - o ordering information 1 series name 2 single output 3 output wattage 4 universal input 5 output voltage 6 optional t : with mounting hole ( f 3.4 thru) 1 2 3 4 5 6 * avoid short circuit between +bc and -bc. it may cause the failure of inside components. * keep trm open, if output voltage adjustment is not necessary. model TUNS50f05 TUNS50f12 TUNS50f24 max output wattage[w] 50.0 50.4 50.4 dc output 5v 10a 12v 4.2a 24v 2.1a specifications model TUNS50f05 TUNS50f12 TUNS50f24 input voltage[v] ac85 - 264 1 f (please refer to the instruction manual, 6.5 derating) current[a] acin 100v 0.67typ (io=100%) acin 200v 0.35typ (io=100%) frequency[hz] 50/60 (47 - 63) efficiency[%] acin 100v 79typ 83typ 84typ acin 200v 81typ 84typ 86typ power factor (io=100%) acin 100v 0.95typ acin 200v 0.90typ inrush current limited by external components (thermistor) leakage current[ma] 0.75 max (60hz, according to iec60950-1) output voltage[v] 51224 current[a] 10 4.2 2.1 line regulation[mv] 10max 24max 48max load regulation[mv] 10max 24max 48max ripple[mvp-p] 0 to +100 c * 1 80max 120max 120max -40 to 0 c * 1 120max 150max 150max 0 to 15% load * 1 200max 280max 380max ripple noise[mvp-p] 0 to +100 c * 1 120max 150max 150max -40 to 0 c * 1 200max 200max 250max 0 to 15% load * 1 280max 360max 460max temperature regulation[mv] 0 to +65 c 50max 120max 240max -40 to +100 c 100max 240max 480max drift[mv] * 2 20max 40max 90max output voltage adjustment range[v] fixed (trm pin open), adjustable by external resistor or external signal 4.50 - 6.00 10.80 - 13.20 21.60 - 26.40 output voltage setting[v] 4.97 - 5.13 11.91 - 12.29 23.62 - 24.38 protection circuit and others overcurrent protection works over 105% of rating and recovers automatically overvoltage protection[v] 6.30 - 7.00 13.90 - 16.35 27.60 - 32.40 remote sensing not provided remote on/off not provided isolation input-output ac3,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) input-fg ac2,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) output-fg ac500v 1minute, cutoff current = 100ma, dc500v 50m w min (20 15 c ) environment operating temp.,humid.and altitude -40 to +100 c (on aluminum base plate), 20 - 95%rh (non condensing) (refer to derating curve), 3,000m (10,000 feet) max storage temp.,humid.and altitude -40 to +100 c , 20 - 95%rh (non condensing), 9,000m (30,000 feet) max vibration 10 - 55hz, 49.0m/s 2 (5g), 3minutes period, 60minutes each along x, y and z axis impact 196.1m/s 2 (20g), 11ms, once each along x, y and z axis safety and noise regulations agency approvals ul60950-1, c-ul (csa60950-1), en60950-1, en50178 harmonic attenuator complies with iec61000-3-2 (class a) * 3 others case size/weight 58.4 x 12.7 x 37.3mm [ 2.3 x 0.5 x 1.47 inches ] (w x h x d) / 80g max cooling method conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) * 1 refer to instruction manual for measuring method of electric characteristics. * 2 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c , with the input voltage held constant at the rated input/output. * 3 please contact us about another class. * providing heat sink as option tu o g v w k p f f 6 7
tu-3 TUNS50 external view (top view) ? recommending size for processing pcb ? tolerance : 0.3 [ 0.012] ? weight : 80g max ? dimensions in mm, [ ]=inches ? mounting hole screwing torque : 0.49n - m (5.0kgf - cm) max 2- f 2.5 5- f 1.5 [1.9] 2- f 3.5 [0.5] [0.3] [0.3] [0.3] [1.0] +vout +bc -bc trm -vout ac2 ac1 0.1 5- f 1 name plate 0.2 2- f 2 mounting hole 2-m3 case (pbt) lot no. base plate (aluminum) 48.3 12.7 7.62 25.4 58.4 max 1.27 37.3 max 48.3 0.5 7.62 7.62 5.0 0.5 (5.0) 12.7 27.9 0.5 (4.7) 7.62 7.62 12.7 0.5 7.62 25.4 1.27 [0.05] [0.05] [0.2] [1.9] [2.3] [0.3] [1.0] [1.1] [0.19] [1.47] [0.3] [0.3] [0.5] [0.5] [0.2] ? div. : 0.2inch ? dimensions in : [inch] mm tu o g v w k p f f 6 7
tu-4 tuns100 ac-dc power supplies power module type tun s 100 f 05 - o ordering information 1 2 3 4 5 6 1 series name 2 single output 3 output wattage 4 universal input 5 output voltage 6 optional t : with mounting hole ( f 3.4 thru) * avoid short circuit between +bc and -bc. it may cause the failure of inside components. * keep trm open, if output voltage adjustment is not necessary. * if remote sensing is not necessary, connect between +vout & +s and between -vout & -s. model tuns100f05 tuns100f12 tuns100f24 max output wattage[w] 100.0 100.8 100.8 dc output 5v 20a 12v 8.4a 24v 4.2a specifications model tuns100f05 tuns100f12 tuns100f24 input voltage[v] ac85 - 264 1 f (please refer to the instruction manual, 6.5 derating) current[a] acin 100v 1.3typ (io=100%) acin 200v 0.7typ (io=100%) frequency[hz] 50/60 (47 - 63) efficiency[%] acin 100v 82typ 83typ 84typ acin 200v 85typ 85typ 86typ power factor (io=100%) acin 100v 0.95typ acin 200v 0.90typ inrush current limited by external components (thermistor) leakage current[ma] 0.75 max (60hz, according to iec60950-1) output voltage[v] 51224 current[a] 20 8.4 4.2 line regulation[mv] 10max 24max 48max load regulation[mv] 10max 24max 48max ripple[mvp-p] 0 to +100 c * 1 80max 120max 120max -40 to 0 c * 1 120max 150max 150max 0 to 15% load * 1 160max 240max 240max ripple noise[mvp-p] 0 to +100 c * 1 120max 150max 150max -40 to 0 c * 1 200max 200max 250max 0 to 15% load * 1 240max 300max 300max temperature regulation[mv] 0 to +65 c 50max 120max 240max -40 to +100 c 100max 240max 480max drift[mv] * 2 20max 40max 90max output voltage adjustment range[v] fixed (trm pin open), adjustable by external resistor or external signal 4.50 - 6.00 10.80 - 13.20 21.60 - 26.40 output voltage setting[v] 4.97 - 5.13 11.91 - 12.29 23.62 - 24.38 protection circuit and others overcurrent protection works over 105% of rating and recovers automatically overvoltage protection[v] 6.30 - 7.00 13.90 - 16.35 27.60 - 32.40 remote sensing provided remote on/off not provided isolation input-output ac3,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) input-fg ac2,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) output-fg ac500v 1minute, cutoff current = 100ma, dc500v 50m w min (20 15 c ) environment operating temp.,humid.and altitude -40 to +100 c (on aluminum base plate), 20 - 95%rh (non condensing) (refer to derating curve), 3,000m (10,000 feet) max storage temp.,humid.and altitude -40 to +100 c , 20 - 95%rh (non condensing), 9,000m (30,000 feet) max vibration 10 - 55hz, 49.0m/s 2 (5g), 3minutes period, 60minutes each along x, y and z axis impact 196.1m/s 2 (20g), 11ms, once each along x, y and z axis safety and noise regulations agency approvals ul60950-1, c-ul (csa60950-1), en60950-1, en50178 harmonic attenuator complies with iec61000-3-2 (class a) * 3 others case size/weight 58.4 x 12.7 x 61.0mm [ 2.3 x 0.5 x 2.4 inches ] (w x h x d) / 120g max cooling method conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) * 1 refer to instruction manual for measuring method of electric characteristics. * 2 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c , with the input voltage held constant at the rated input/output. * 3 please contact us about another class. * providing heat sink as option tu o g v w k p f f 6 7
tu-5 tuns100 external view (top view) ? recommending size for processing pcb ? tolerance : 0.3 [ 0.012] ? weight : 120g max ? dimensions in mm, [ ]=inches ? mounting hole screwing torque : 0.49n - m (5.0kgf - cm) max [0.2] [1.9] [2.3] [0.3] [1.0] [0.2] [2.0] [2.4] [0.5] [0.5] [0.2] [2.0] [0.3] [0.4] 2- f 2.5 7- f 1.5 [0.2] [0.2] [0.3] [0.3] [0.3] [0.4] [0.4] [0.3] [1.9] 4- f 3.5 [1.0] [0.3] -bc +bc name plate mounting hole case (pbt) lot no. base plate (aluminum) 0.1 7- f 1 0.2 2- f 2 4-m3 +vout +s trm -s ac1 -vout ac2 10.16 48.3 50.8 25.4 7.62 12.7 0.5 5.0 0.5 58.4 max 61max 7.62 25.4 7.62 7.62 7.62 5.08 5.08 50.8 0.5 5.1 () (5.0) 48.3 0.5 10.16 10.16 7.62 7.62 12.7 ? div. : 0.2inch ? dimensions in : [inch] mm tu o g v w k p f f 6 7
|
